3 – Display
Language: Traditional (chinese), Arabic, Chinese, Czech, English, French, German, Italy,
Nepali, Persian, Polish, Portuguese, Russian, Eslovenian, Spanish, Thai.
Power saving: Options for C2 Pro entering in standby mode.
- Turn off: after a time configurated in “Standby” the equipment stays with the screen
off and, back with the command of any key or when the fingerprint sensor is actived;
- Screensaver: after a time configurated in “Standby” the equipment stays with the
screen off and showing date and hour. It’s back at the command of any key or when the
fingerprint sensor is activated;
NOTE: In both cases, when the equipment is in standby, the card reader read but not
validated.
- Disabled: screen always enabled.
Bright level: Changes the adjustment of bright of the screen.
Ul style: Background colour of the screen and icon’s layout.
- default: background colour is blue with squared and round edges menu's icons;
- square: background colour is red with squared menu's icons;
- circle: background colour is green with circled menu's icons.
Keyboard lock: Lock the keyboard of the C2Pro. NOTE: Be careful with this option – once
enabled it’s necessary to make a factory reset at the equipment to the keyboard back to
work again.
Standby(min): Time for the C2 Pro enter at power saving.
ShowCard: Mode of sending the card’s serial.
4 – Basic Info
To Next Page
Loading...
Need help?
General