Port: TCP port used by the software.
CommPW: Option to enable the communication protected by password. Consult the
documentation of the software to more information.
PWSetting: In case of the communication with password be enable it’s possible change this
password.The standard password is 12345.
Server Type: There are two options of connections, IP address to connection with the
software or connection by URL (hostname) that allow connections outside of the network.
Server IP: IP address used to connection with the software.
b) RS485
The communications with software are disable and the C2 Pro wors only as a slave biometry
by RS485. NOTE: Both communication will not work at the same time.
c) Server - software used working as Client
Port: TCP port used by the software.
CommPW: Option to enable the communication protected by password. Consult the
documentation of the software to more information.
PWSetting: In case of the communication with password be enable it’s possible change this
password.The standard password is 12345.
To Next Page
Loading...
Need help?
General