Nidec 5200250 - Page 42

42 Unidrive M/HS Frame 5 to 6 Power Installation Guide
Issue Number: 9
Figure 3-18 Brake resistor with the mounting bracket
1. Ground connection (1 x M4 nut and washer).
2. Attaching the brake resistor to the mounting bracket (using 2 x M4 screws and nuts).
Figure 3-19 Mounting bracket dimensions
Figure 3-20 Brake resistor dimensions
1
2
118 mm ( 4.65 in)
15.5mm
(0.61 in)
Æ 4.5mm(0.18 in)
x2holes
1.5mm
(0.06 in)
30.5mm
(1.20 in)
80 mm (3.15 in)
130 mm (5.12 in)
Æ 4.5x6mm(0.18 in)
x2holes
R = 1.5mm
(0.06)
60 mm (2.36 in)
68 mm (2.68 in)
118mm(4.65 in)
130 mm (5.12 in)
Æ 4.5mm(0.18 in)
x4holes
15 mm
(0.59 in)