Nidec ID300 - Safety: Usage, Transport, and Installation; Usage and Handling Precautions; Installation Safety Warnings

www.usmotors.com
ID300/302 Integrated Motor Drive | Important Safety Information
3
Usage
• ID300/302 motors and drives are components designed for integration into installations or
electrical machines. When integrated into a machine, commissioning MUST NOT take place
untilithasbeenveriedthatthemachineconformstoNationalElectricalCodeandallapplicable
safety standards.
• Installation and wiring must follow the National Electrical Code and all local electrical codes.
Transportation, Storage
• All instructions concerning transportation, storage, and correct handling must be observed.
• Theclimaticconditionsspeciedinthemanualmustbeobserved.
Installation
• Theinstallationandcoolingofequipmentmustcomplywiththespecicationsinthemanual
supplied with the product.
• The ID300/302 motor must be protected against any excessive stress. There must be no damage
topartsand/ormodicationoftheclearancebetweencomponentsduringtransportationand
handling.
• Avoid touching the electronic components and contact parts.
• The ID300/302 motor contains parts which are sensitive to electrostatic stresses and may
be easily damaged, if handled incorrectly. Electrical components MUST NOT be exposed to
mechanical damage or destruction. Otherwise, there is a serious risk to the safety and health of
personnel.
WARNING
!
WARNING
!
CAUTION
!