Nidec ID300 - Safety: Electrical and Operation; Electrical Connection Safety; Operation Safety

www.usmotors.com4
ID300/302 Integrated Motor Drive | Important Safety Information
Electrical Connection
• All National and local safety codes must be observed when work is performed on the ID300/302
motor while power is applied.
• Theelectricalinstallationmustcomplywiththerelevantspecications(forexampleconductor
cross-sections, protection via fused circuit-breaker, connection of protective conductor). More
detailed information is given in the manual.
• Instructions for an installation which meets the requirements for electromagnetic compatibility,
suchasscreening,grounding,presenceoflters,andcorrectinsertionofcablesandconductors
are given in the documentation supplied with the ID300/302 motor. These instructions must be
followed in all cases.
• When required, adherence to the FCC standard is the responsibility of the manufacturer of the
installation or the machine.
Operation
• InstallationsincorporatingtheID300/302mustbettedwithadditionalcircuitprotectionand
monitoringdevicespertheNationalElectricalCodeandalllocalelectricalcodes.Modicationsto
the ID300/302 motor using control software are permitted.
• DO NOT touch active parts of the device or the live power connections immediately after the
ID300/302 motor is powered down. The capacitors may still be charged. Wait at least 10 minutes
before removing the cover.
• All doors and protective covers must be kept closed during operation.
• Wear safety glasses to inspect the equipment while it is running or while working on equipment.
Service and Maintenance
• Refer to the manufacturer's documentation.
WARNING
!
WARNING
!
CAUTION
!
NOTICE