Nidec Unidrive M200 - Page 111

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media
Card
Onboard
PLC
Advanced
parameters
Diagnostics UL Listing
Unidrive M200 / M201 Control User Guide 111
Issue Number: 2
Parameter
Range() Default()
Type
OL RFC-A OL RFC-A
09.001 Logic Function 1 Output Off (0) or On (1)
RO Bit ND NC PT
09.002 Logic Function 2 Output Off (0) or On (1)
RO Bit ND NC PT
09.003 Motorized Pot Output ±100.00 %
RO Num ND NC PT PS
09.004 Logic Function 1 Source 1 0.000 to 30.999 0.000 RW Num PT US
09.005 Logic Function 1 Source 1 Invert Off (0) or On (1) Off (0) RW Bit US
09.006 Logic Function 1 Source 2 0.000 to 30.999 0.000 RW Num PT US
09.007 Logic Function 1 Source 2 Invert Off (0) or On (1) Off (0) RW Bit US
09.008 Logic Function 1 Output Invert Off (0) or On (1) Off (0) RW Bit US
09.009 Logic Function 1 Delay ± 25.0 s 0.0 s RW Num US
09.010 Logic Function 1 Destination 0.000 to 30.999 0.000 RW Num DE PT US
09.014 Logic Function 2 Source 1 0.000 to 30.999 0.000 RW Num PT US
09.015 Logic Function 2 Source 1 Invert Off (0) or On (1) Off (0) RW Bit US
09.016 Logic Function 2 Source 2 0.000 to 30.999 0.000 RW Num PT US
09.017 Logic Function 2 Source 2 Invert Off (0) or On (1) Off (0) RW Bit US
09.018 Logic Function 2 Output Invert Off (0) or On (1) Off (0) RW Bit US
09.019 Logic Function 2 Delay ± 25.0 s 0.0 s RW Num US
09.020 Logic Function 2 Destination 0.000 to 30.999 0.000 RW Num DE PT US
09.021 Motorized Pot Mode 0 to 4 0 RW Num US
09.022 Motorized Pot Bipolar Select Off (0) or On (1) Off (0) RW Bit US
09.023 MotorizedPotRate 0to250s 20s RW Num US
09.024 Motorized Pot Scaling 0.000 to 4.000 1.000 RW Num US
09.025 Motorized Pot Destination 0.000 to 30.999 0.000 RW Num DE PT US
09.026 Motorized Pot Up Off (0) or On (1) Off (0) RW Bit NC
09.027 Motorized Pot Down Off (0) or On (1) Off (0) RW Bit NC
09.028 Motorized Pot Reset Off (0) or On (1) Off (0) RW Bit NC
09.029 Binary Sum Ones Off (0) or On (1) Off (0) RW Bit
09.030 BinarySumTwos Off(0)orOn(1) Off(0) RW Bit
09.031 Binary Sum Fours Off (0) or On (1) Off (0) RW Bit
09.032 Binary Sum Output 0 to 255
RO Num ND NC PT
09.033 Binary Sum Destination 0.000 to 30.999 0.000 RW Num DE PT US
09.034 Binary Sum Offset 0 to 248 0 RW Num US
09.035 Timer 1 Start Date 00-00-00 to 31-12-99 00-00-00 RW Date US
09.036 Timer 1 Start Time 00:00:00 to 23:59:59 00:00:00 RW Time US
09.037 Timer 1 Stop Date 00-00-00 to 31-12-99 00-00-00 RW Date US
09.038 Timer 1 Stop Time 00:00:00 to 23:59:59 00:00:00 RW Time US
09.039 Timer 1 Repeat Function
NonE (0), 1 (1), 2 (2), 3 (3),
4 (4), 5 (5), 6 (6), 7 (7)
NonE (0) RW Txt US
09.040 Timer1Enable Off(0)orOn(1) Off(0) RW Bit US
09.041 Timer 1 Invert Off (0) or On (1) Off (0) RW Bit US
09.042 Timer 1 Output Off (0) or On (1)
RO Bit ND NC PT
09.043 Timer 1 Destination 0.000 to 30.999 0.000 RW Num DE PT US
09.045 Timer 2 Start Date 00-00-00 to 31-12-99 00-00-00 RW Date US
09.046 Timer 2 Start Time 00:00:00 to 23:59:59 00:00:00 RW Time US
09.047 Timer 2 Stop Date 00-00-00 to 31-12-99 00-00-00 RW Date US
09.048 Timer 2 Stop Time 00:00:00 to 23:59:59 00:00:00 RW Time US
09.049 Timer 2 Repeat Function
NonE (0), 1 (1), 2 (2), 3 (3), 4 (4),
5 (5), 6 (6), 7 (7)
NonE (0) RW Txt US
09.050 Timer2Enable Off(0)orOn(1) Off(0) RW Bit US
09.051 Timer 2 Invert Off (0) or On (1) Off (0) RW Bit US
09.052 Timer 2 Output Off (0) or On (1)
RO Bit ND NC PT
09.053 Timer 2 Destination 0.000 to 30.999 0.000 RW Num DE PT US
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination
IP IP address Mac Mac address Date Date parameter Time Time parameter SMP Slot,menu,parameter Chr Character parameter Ver Version number