120
Specifications
Technical Notes
* Based on Camera and Imaging Products Association (CIPA) standards for measuring
the life of camera batteries. Measured at 25 °C (77 °F); zoom adjusted with each
shot, flash fired with every other shot, image mode set to [c Normal(2816)]. Battery
life may vary depending on shooting interval and length of time menus and images
being displayed.
• Unless otherwise stated, all figures are for a camera with lithium batteries operated
at an ambient temperature of 25 °C (77 °F).
Aperture Electronically controlled preset aperture
Range Two steps (f/3.2 and f/6.4 [W])
ISO sensitivity Approximately equivalent to ISO 50 (auto gain to ISO 800
equivalent)
Self-timer Ten-second duration
Built-in flash
Range W: 0.3–5.0 m/11.8 in. –16 ft. 4.9 in.
T: 0.3–3.0 m/11.8 in. –9 ft. 10.1 in.
Flash control Sensor flash system
I/O terminals Audio/video (A/V) out, digital I/O (USB)
Interface USB
Video output Can be selected from NTSC and PAL
Supported
languages
Czech, Danish, German, English, Spanish, French, Indone-
sian, Italian, Dutch, Norwegian, Polish, Portuguese, Rus-
sian, Finnish, Swedish, Chinese (Simplified and
Traditional), Japanese, Korean, Thai
Power sources • Two AA alkaline, oxyride, or lithium batteries
• Two EN-MH1 rechargeable NiMH batteries (available
separately)
• EH-65A AC adapter kit (available separately)
Battery life Approximately, 1000 shots with lithium, 400 shots with
alkaline, or 540 shots with EN-MH1 batteries* (available
separately)
Dimensions
(W × H × D)
91 × 60.5 × 26 mm/3.6 × 2.4 × 1.0 in.
(excluding projections)
Weight 125 g (4.4 oz.) without battery or memory card
Operating environ-
ment
Temperature 0–+40 °C (+32–104 °F)
Humidity Less than 85% (no condensation)
To Next Page
Loading...
