63
Connecting to a Computer
Connecting to Televisions, Computers, and Printers
Setting the USB Option
Set the USB option (c 102) in the setup menu on the camera before con-
necting the camera to the computer or printer.
1 Press m.
2 Press the multi selector G or H to
choose [Set up] and press d.
• The setup menu is displayed.
• For information on using the multi selector, see
“Multi Selector” (c 8).
3 Press G or H to choose [Interface] and
press d.
4 Press G or H to choose [USB] and press
d.
5 Press G or H to choose [PTP] or [Mass
storage] and press d.
• The setting is enabled.
• To finish setting, press m.
MENU
Exit
?
Shooting menu
Set up
Image mode
White balance
Exp. +/-
Continuous
MENU
Exit
--
--
--
--
?
Set up
Language
Interface
Reset all
Battery Type
Firmware version
Interface
USB
Video mode
Auto transfer
MENU
Exit
PTP
Mass storage
MENU
Exit
USB
To Next Page
Loading...
