61
Connecting to Televisions, Computers, and Printers
Connecting to a TV
Connect the camera to a television using the audio/video (A/V) cable to play
back pictures on the television.
1 Turn the camera off.
2 Connect the A/V cable.
• Connect the yellow plug to the video-in jack on the TV, and the white plug to
the audio-in jack.
3 Tune the television to the video channel.
• See the documentation provided with your television for details.
4 Press i for one second to turn the cam-
era on.
• The camera monitor will remain off and the image
normally shown in the monitor will be displayed on
the television.
j Connecting the A/V Cable
• When connecting the A/V cable, be sure that the camera connector is oriented correctly.
Do not use force when connecting the A/V cable to the camera. When disconnecting the
A/V cable, do not pull the connector at an angle.
• Do not pinch the connector cover between the camera’s A/V connector and the A/V cable
connector when connecting the cable to the camera.
j Video Mode
Be sure that the camera’s video mode setting conforms to the standard used by your televi-
sion. The video mode setting is an option in the [Interface] (c 102) item in the setup menu
(c 90).
WhiteYellow
To Next Page
Loading...
Need help?
General
