40
Scene Modes
Selecting Scene Mode: b Scene Mode
Taking Pictures for a Panorama (c 39)
The camera focuses on the subject in the center of the frame. Use a tripod
for best results.
1 Press the multi selector G or H to
choose [F Panorama assist] in the scene
menu and press d.
•The E icon appears in yellow to indicate the pan-
orama direction (that is, the direction in which pic-
tures are serialized).
• For information on using the multi selector, see
“Multi Selector” (c 8).
2 Press G, H, I, or J to select the
desired pan direction and press d.
• The arrow showing the selected direction turns
white.
• Before the first picture is taken, the flash mode
(c 24), self-timer (c 26), and macro close-up
(c 27) settings can be adjusted.
• The direction can be re-selected by pressing d again.
3 Take the first picture.
• The first picture is displayed in the first
third of the monitor.
4 Take the second picture.
• Compose the next picture so that it over-
laps the first picture.
• Repeat until you have taken the necessary
number of pictures to complete the scene.
MENU
Exit
?
Scene menu
SCN
Panorama assist
Voice recording
Image mode
99
99
88
To Next Page
Loading...
