Movies 49
Recording Time-Lapse Movies
Selecting Time-lapse movie from the movie options menu (B 48) displays
the menu shown in Step 1, below.
A Time-Lapse Movies
Adjust flash mode, focus mode, and exposure compensation before shooting begins. To
prevent loss of power during recording, use a fully-charged battery or optional EH-62A AC
adapter kit. Do not rotate the mode dial to a different setting during recording.
12
Choose interval between shots. Select and exit to movie options menu.
Press F button to exit menu.
3
Press shutter-release button all the way
down to start recording. Camera will take
pictures at specified interval until shutter-
release button is pressed again, memory is
full, or 1,800 frames have been recorded.
Monitor turns off and power-on lamp
blinks between shots.
233
To Next Page
Loading...
