Configuring the Camera’s Wireless Settings
26
Wireless Settings from the Camera
This section explains wireless LAN setup using the camera.
Basic Operation of the Wireless Settings
Displaying the Wireless Settings Menu
1 Press the e button in playback mode or shooting mode. Rotate the
rotary multi selector to choose
F and press the k button.
The setup menu is displayed.
2 Rotate the rotary multi selector, or press up or
down, to choose Wireless settings and press the
k
button.
The wireless settings menu is displayed.
Basic Menu Operation
Use the rotary multi selector to choose menu items and apply selections.
1
Items can also be selected by pressing the rotary multi selector up or down.
2
Pressing right advances display to the next screen.
C Note on the Rotary Multi Selector
Since the rotary multi selector can be used in various ways, concrete descriptions are included only
in cases where necessary.
In this guide, up, down, left, and right presses of the rotary multi selector are indicated with H, I,
J, and K.
Set up
Set up
Menus
Welcome screen
Date
Monitor settings
Date imprint
Set up
Firmware version
Wireless settings
Select options
1
Apply selection
(advance display to
next screen)
2
Return display to the
previous screen
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
Q7115_Wireless_EN.book Page 26 Tuesday, June 3, 2008 7:34 PM
Configuring the Camera’s Wireless Settings
27
Entering Text with the Camera
Text for information such as aliases, e-mail addresses, and WEP keys
can be entered using the camera’s rotary multi selector. Rotate the
rotary multi selector, or press
H, I, J, or K, to choose a character
or
G, H, I, or J in the keyboard area.
• Text is entered at the current cursor position in the text entry area.
• Highlight G or H and press the
k button to move the cursor in the text entry area.
• Highlight I and press the
k button to change the type of character entered. Each
time the
k button is pressed, the type of character changes in the following order:
lowercase letters ➝ uppercase letters ➝ symbols ➝ lowercase letters.
• To delete a character, move the cursor to that character’s position and press the
l
button to delete.
• Press the
g (j) button to preview the characters that have been entered. Press the g
(
j) button again to return to the text entry screen.
• Once all text necessary has been entered, highlight J and press the
k button. The
monitor display proceeds to the next screen.
abcdefgh i j k l
n
m
opqr s t uvw y
0
z
123456789
@
.
6410
Nikon4
@
xxx
x
Email
Back Delete
Text entry area
Selected characters are
displayed here.
Keyboard area
Use the rotary multi selector to
highlight characters and
press the k button to select.
GH
I
J
Q7115_Wireless_EN.book Page 27 Tuesday, June 3, 2008 7:34 PM
To Next Page
Loading...
