Configuring the Camera’s Wireless Settings
34
C
Editing the my Picturetown User Information
When uploading pictures using Picture Mail or Picture Bank after user information has been
registered with my Picturetown, user information (including information stored in the camera’s
Sender setting) stored in the camera cannot be displayed or edited using the camera or the Utility
(A 42).
c
Specifying Picture Mail Recipients/Recipient Groups
Specifying Picture Mail Recipients
Follow the instructions below to specify a recipient (e-mail address and alias) for Picture
Mail e-mail notification.
Recipients can also be added, or edited, later using the Utility or the camera. See “o
Specifying Picture Mail Recipients/Recipient Groups” (A 22) for more information on
performing these actions using the Utility.
1 Select Address options from the Wireless
settings option (A 26) in the camera’s setup menu
and press the
k button.
2 Select New and press the k button.
If recipients or groups have been specified, they are listed under
New.
The recipient’s information can be edited by following the same
procedure used for specifying a new recipient. Choose a
recipient, press the k button, and proceed to step 4.
To delete a specified recipient, highlight the recipient and press
l.
Once sender information has been configured, proceed as indicated below.
• Using Picture Mail: Proceed to “c Specifying Picture Mail Recipients/Recipient
Groups” (A 34).
• Not using Picture Mail: Proceed to “d Protecting Wireless LAN Information
Stored in the Camera (Applying a Password/Resetting the Camera)” (A 37).
Wireless settings
Network profile
Sender
Address options
Picture Bank
Password
Back
New
Choose address
Q7115_Wireless_EN.book Page 34 Tuesday, June 3, 2008 7:34 PM
Configuring the Camera’s Wireless Settings
35
3 Select Address and press the k button.
4 Enter recipient’s e-mail address (A 12).
Enter an e-mail address comprised of up to 64 alphanumerical
characters.
E-mail addresses for only certain models of cellular telephones,
available in the United States, are supported (A 5).
For information on entering text, see “Entering Text with the
Camera” (A 27).
Up to 30 recipients can be specified.
5 Enter recipient’s alias (A 12).
Enter an alias comprised of up to 16 alphanumerical characters.
Once the alias has been entered, the confirm address and alias
screen will be displayed. Press the k button to apply the
settings and return to the choose address screen. To add
recipients, repeat step 2 through 5. To create recipient groups,
see “Creating Recipient Groups” (A 36).
Once recipients have been specified, proceed to “d Protecting Wireless LAN
Information Stored in the Camera (Applying a Password/Resetting the Camera)”
(A 37).
New
Address
Group
abcdefghi jkl
n
m
opqr s t uvwx y
0
z
123456789
@
.
Nik no5
@
xxx
6410
Email
Back Delete
abcdefgh i j k l
n
m
opqr s t uvwxy
0
z
12345 6789
@
.
Nik no5
16 6
Alias
Back Delete
Q7115_Wireless_EN.book Page 35 Tuesday, June 3, 2008 7:34 PM
To Next Page
Loading...
