Reference Section
E4
B Notes About Easy Panorama Shooting
• The range of the image seen in the saved image is narrower than that seen in the
monitor at the time of shooting.
• If the camera is moved too quickly or shaken too much, or if the subject is too
uniform (e.g. walls or darkness), an error may occur.
• If shooting stops before the camera reaches the halfway point in the panorama
range, a panorama image is not saved.
• If more than half of the panorama range is captured but shooting ends before
reaching the edge of the range, the range not captured is saved and displayed in
gray.
C Changing the Shooting Range
• In easy panorama scene mode, press the
d button, tap p, and tap W Normal
(180°) or X Wide (360°).
• When the camera is held in the horizontal
position during shooting, the image size
(width × height) is as follows:
- Normal (180°): 4800 × 920 when
moved horizontally, 1536 × 4800 when
moved vertically
- Wide (360°): 6400 × 560 when moved horizontally, 1024 × 6400 when moved
vertically
Easy panorama
Normal (180°) Wide (360°)
To Next Page
Loading...
