12
Basic Steps for Shooting and Playback
1 Prepare the included Charging AC
Adapter.
If a plug adapter* is included with your camera, attach the
plug adapter to the plug on the Charging AC Adapter.
Push the plug adapter firmly until it is securely held in
place. Once the two are connected, attempting to
forcibly remove the plug adapter could damage the
product.
* The shape of the plug adapter varies depending on the
country or region in which the camera was purchased.
The Charging AC Adapter comes with the plug adapter
attached in Argentina and Brazil.
2 Make sure the battery is installed in the camera, and then
connect the camera to the Charging AC Adapter in order of
1 to 3.
• Make sure that the plugs are properly oriented. Do not insert or remove the
plugs at an angle when connecting or disconnecting them.
B Note
Do not use a USB cable other than the UC-E21. Using a USB cable other than
the UC-E21 could result in overheating, fire or electric shock.
Preparation 2 Charge the Battery
USB cable (included)
Electrical outlet
Power-on lamp
To Next Page
Loading...
Need help?
General
