Reference Section
E28
r Tapping the Monitor to Focus (Touch AF/AE)
1 Tap the subject on which
the camera focuses.
• u or a double border is
displayed at the area tapped.
• When digital zoom is in effect,
the focus area cannot be
selected.
• To cancel the focus area
selection, tap a displayed on the right side of the monitor.
• If X is displayed in the monitor,
the focus area could not be set.
Tap a subject inside the X.
2 Press the shutter-release button to take a
picture.
• Press the shutter-release button halfway to acquire focus
and exposure, and press it all the way down to release the
shutter.
B Notes About Touch AF/AE
The focus area that can be set varies depending on the shooting mode (E24).
Enter the shooting screen M Press the d button M q/s/r Touch
shooting M r Touch AF/AE M Press the d button
1910
1910
1910
1910
To Next Page
Loading...
