Nikon D1 - Connecting to a Computer

103
Connecting to a Computer
The D1 can be connected directly to a computer via its IEEE 1394 interface,
when images can be transferred to the computer using
Nikon View DX or Nikon
Capture software (available separately). Using Nikon Capture , you can control
your camera from your computer for advanced studio photography.
1
After checking that the camera is off, open the
cover protecting the camera’s IEEE 1394 connector
and connect a six-pin, IEEE 1394 cable (available
separately) to the camera.
Connections: Connecting to a Computer
2
Check that the other end of the cable is connected
to your computer’s IEEE 1394 connector. For
information on connecting IEEE 1394 peripherals
to your computer, refer to the documentation
provided with your computer, or with your IEEE
1394 card or expansion board.