110
Nikkor lenses that can
NOT
be used with the D1
The following Nikkor lenses can not be used with the D1:
• TC-16A AF Teleconverter
• Non-AI lenses
• Lenses that require the AU-1 focusing unit (400mm f/4.5, 600mm f/5.6,
800mm f/8, 1200mm f/11)
• Fisheye (6mm f/5.6, 8mm f/8, OP10mm f/5.6)
• 21mm f/4 (old type)
• K2 ring
• ED 180–600mm f/8 (serial numbers 174041–174180)
• ED 360–1200mm f/8 (serial numbers 174031–174127)
• 200–600mm f/9.5 (serial numbers 280001–300490)
• Lenses for the F3AF (80mm f/2.8, 200mm f/3.5, TC-16S Teleconverter)
• PC 28mm f/4 (serial number 180900 or earlier)
• PC 35mm f/2.8 (serial numbers 851001–906200)
• PC 35mm f3.5 (old type)
• 1000mm f/6.3 Reflex (old type)
• 1000mm f/11 Reflex (serial numbers 142361–143000)
• 2000mm f/11 Reflex (serial numbers 200111–200310)
1 Metering area corresponds to selected focus area (see “Camera Settings: Metering”).
2 Without shifting and/or tilting.
3 The camera’s exposure metering and flash control system do not work properly when shifting and/or tilting the
lens, or when an aperture other than the maximum aperture is used.
4 Compatible with all AF-S and AF-I Nikkor lenses except the AF-S 17–35 mm f/2.8D IF-ED and AF-S 28–70 mm
f/2.8D IF-ED.
5 With maximum effective aperture of f/5.6 or faster.
6 With maximum aperture of f/5.6 or faster.
7 Some lenses can not be used (see below).
8 Exposure determined by presetting lens aperture. AE lock must also be performed before shifting.
9 Exposure determined by presetting lens aperture. Exposure must also be determined before shifting.
10 Exposure compensation required with some lenses (refer to instruction manual provided with teleconverter).
11 Auto Extension Ring PK-11A, 12, or 13 required.
12 Exposure determined by presetting lens aperture on bellows. Release shutter after exposure metering.
Technical Notes: Compatible Lenses
To Next Page
Loading...
