VBA20001-R.3720.A
- Ａ 0 ・ -
logo�Q0310�forGraphic
070509�Gdesign�ito
#787
#747
#1053
#707×2
#706
#705
#973
#1003
#974
#39
#911
#731
#730
#955
#703
#929
#1544×3
#912
#913
#765
#735
#747
#750
#1606
#1547×2
#1537×2
#1540
#1560
#1540
Outside LCDFPC unitLCDFPC unit
・
Attach the compensation/mode button rubber SW (#730)
and AF-ON button rubber (#787).
・
Apply the grease to the power dial pattern section.
・
Connect the mode dial FPC to the connector.
Mode dial FPC
FPC unit
Red
Yellow
Black
・
Mount the outside LCD FPC unit to the top cover.
・
Tighten two screws (#1547), three screws (#1544), two
screws (#1540), and one screw (#1560).
・
Solder the three wires.
Grease:PL-22S
#750
※
[#750] spring hooking position
Outside LCD-
FPC unit
Metering mode FPC
To Next Page
Loading...
