Nikon D7000 - Page 148

128
r
❚❚ Selecting a White Balance Preset
To set white balance to a preset value:
1 Select L (Preset manual).
Highlight Preset manual in the white
balance menu and press 2.
2 Select a preset.
Highlight the desired preset and press W.
To select the highlighted preset and display
fine tuning menu (0 119) without
completing the next step, press J instead.
3 Select Set.
Highlight Set and press 2. Fine tuning
menu for the selected white balance preset
is displayed (0 119).
A Selecting a White Balance Preset: the WB Button
At a setting of L (Preset manual), presets can also be selected by pressing the WB button
and rotating the sub-command dial. The current preset is displayed in the control panel
while the WB button is pressed.
WB button Sub-command dial Control panel
W button