Nikon DTM Series - $DSN; $DSX; $HAN; $ANG

Nikon Communication Interface Manual
P12/34
$DSN
Input None
Output None
Remarks Set “output SD after each measurement” feature ON. After this command, SD from
the very first measurement (initiated by $MSR) is to be output and “$DOF” is set
automatically.
$DSX
Input None
Output None
Remarks Set “output SD/HA/VA after each measurement” feature ON. After this command,
SD/HA/VA from the very first measurement (initiated by $MSR) is to be output and
“$DOF” is set automatically.
$HAN
Input None
Output None
Remarks Return (=change the screen on the instrument) to the BMS.
$ANG
Input None
Output None
Remarks
Return (=change the screen on the instrument) to the BMS.
Confidential