Nikon DTM Series - !AVE; !PNO; !PSM; !T-P

Nikon Communication Interface Manual
P16/34
b) Data set command
!AVE
Input + 0 - 1 : Number of averaging measurement (“00” – “99”)
Output None
Remarks
Set an average count of the measurement. It is set to [MSR] (or [MSR1]) key only.
!PNO
Input + 0 - 6 : Point number (7 digits)
Output None
Remarks Set a default point number/name (7-digit PT)
!PSM
Input + 0 - 3 : Prism constant ("-999" - "999")
Output None
Remarks
Set the prism constant. It is set to [MSR] (or [MSR1]) key only.
!T-P
Input + 0 - 2 : Air temperature
+ 3 : " "
+ 4 - 7 : Air pressure
Output None
Remarks Set the current temperature and pressure.
!HAN
Input + 0 - 6 : Horizontal angle (7 digits)
Output None
Remarks Set the horizontal angle. (in 7 digits)
Confidential