Advanced Operations26
No indicator
To reduce the "Red-eye" effect
Red-eye Reduction mode
In flash photography, the subject’s eyes may sometimes
appear bright red. To reduce this “red-eye” effect, use
this mode.
1.
Press the button until “ ” appears
on the LCD panel.
Each time you press the button, the indicator changes in
the order shown below:
No indicator : Red-eye Reduction mode canceled
To cancel Red-eye Reduction mode.
: Red-eye Reduction mode
To reduce the “Red-eye” effect.
About Red-eye Reduction mode
This mode is not recommended when shooting fast-moving
subjects.
: Self-Timer ( p. 28) mode
For self-timer operation.
Note that Red-eye Reduction is automatically
set when the self-timer is used.
To Next Page
Loading...
