31
Additional Information
Correcting the date and time
(Lite Touch Zoom 70W QD only)
1.
Press the MODE button to obtain the
Year/Month/Day indication.
2.
Press the SEL button so that the
indicator to be set blinks.
3.
Press the ADJUST button to set the
blinking digit.
Each time you press the ADJUST button, the number
advances by one.
Holding the ADJUST button pressed for more than 2 seconds
advances the number quickly.
4.
When the blinking indicator is correctly
set, press the SEL button again so that
the next indicator blinks.
Repeat steps 3 and 4 to set all the digits.
To correct the time, press the MODE button to obtain the Day/
Hour/Minute indication.
To Next Page
Loading...
