35
Additional Information
A characteristic of electronic cameras
In rare cases, when strong static electricity or the like is
applied to the camera, the camera may not work properly.
If this happens, remove the battery and reinstall it.
Check points and solution
a “ ” appears on the LCD panel when the
camera is turned on by opening the slide
cover.
→Remove the film and load it again.
a The battery for date is exhausted.
→Replace it with a new one.
aThe date panel displays “ .”
→Set the panel so that it displays the
indication to be imprinted.
The numeral
“ ” does not
appear even
when film is
loaded.
The date/
time are not
imprinted on
pictures.
Problem
Date panel
LCD panel
Ref. page
10,11
32,33
30
To Next Page
Loading...
Need help?
General
