Nikon N75 - Single Servo AF

Autofocus
TIL phase detection, Nikon Multi-CAM900 autofocus module with
AF-Assist Illuminator (approx. 0.5m-3m [1.6-9
.8 ft.])
• Detection range:
EV -1 to EV 19 (ISO 100, at normal temperature)
Lens servo
AF: Auto-Servo AF: camera automatically chooses Single Servo
AF or
Continuous Servo AF operation according to the subject status, i.e.
stationary
or moving .
• Single Servo AF (focus is locked when the subject is in-focus)
• Continuous Servo AF (camera continues to focus on a moving
subject, automatically selected when
..!. ... mode is set); Focus
Tracking with Lock-On
™ automatically activated by subject's
status
M: Manual focus
Focus area One
of five focus areas can be selected
Focus area
mode AF focus mode:
• Dynamic
AF Mode with Closest-Subject Priority
• Dynamic AF
Mode with Center-Subject Priority
• Dynamic
AF Mode
M focus mode:
• Center Area
Mod e
• Single Area
Mode
Metering system TIL full-aperture exposure metering system
• 3D 25-segment Matrix Metering: with G- or D-type
AF Nikkor
• 25-segment Matrix Metering: with
AF Nikkor other than G- or 0-
type (except AF Nikkor for F3AF and IX-Nikkor), AI-P Nikkor
• Center-Weighted Metering: automatically selected with Manual
exposure mode
•
Spot Metering: in Auto Exposure lock with Custom Setting option
(metering system
in the Auto Exposure lock)
Metering range
3D 25-segment Matrix Metering:
EV 1-20
Center-Weighted Metering: EV 1-20
Spot Metering: EV 4-20
(at normal temperature, ISO 100, f/1.4 lens)
Expos u re meter co upl ing
CPU
Exposure compensation
Exposure compensated in ±3 EV range, in 1/2 steps (except in M or
'l.")
125