Use either 1.
5V
AA-type penlight alkaline-manganese
or 1.
2V
NiCd batteries.
Load four batteries into the battery chamber,
following the
1-
1.5V
."
indicators inside the chamber.
3. Close battery chamber lid.
mJ
Close the lid, then slide the cover back to close.
Turn
the mounting foot locking wheel clockwise
as
far
as
it
goes, taking care not to overtighten.
Slide the mounting foot forward into the camera's
accessory shoe
as
far
as
it goes.
Turn
locking wheel to tighten.
3
To Next Page
