Nikon SB-24 - Accessories for TTL Multiple Flash

ACCESSORIES FOR TTL MULTIPLE FLASH
TTL Remote Cord SC·17
For Programmed TTL auto flash operation or TTL auto flash
operation when using the S8-24 off the Nikon F4-Series (with
DP-20 or DA-20) , F-801/N8008, F-501/N2020, F-401s/N4004s,
F-301/N2000, FA, FE2 or FG camera, use coiled cord SC-17 .
The SC-17 provides automat ic sync s peed sett i ng and the same
ready-light vi ew-finder indicati on as if the flash unit were directly
mounted on the camera . SC-17 comes wi th two TIL multiple fla sh
terminals and one tr i pod socket. The SC-17 is approx 1.5m (4.9 tt).
TTL Remote Cord SC·24
For TTL auto flash operation when using the S8-24 off the
Nikon F4 camera fitted with either the 6X High-Magnification
Finder DW-21 or Waist-Level Finder DW - 20, use SC-24 instead
of SC-17.
The SC-24 also comes with two TTL multiple flash terminals and
one tripod socket. The SC-24 is approx . 1.5m(4.9ft).
TTL Multi·Flash Adapter AS·10
When using more than three flash units for TTL multiple flash
operation, use the Multi-Flash Adapter AS-10, an adapter with
three multiple flash terminals and one tripod socket. (Requires
SC-18 or SC - 19 for each flash use.)
90
TTL Multi·Flash Sync Cords SC·18 and SC·19
To connect the flash units for TTL multiple flash operation, use
Sync Cord SC - 18 or SC - 19 .
The SC - 18 is approx . 1.5m (4 .9ft) long ; the SC-19 , 3m (9 .8ft)
long .
SC-24
SC-19
SC-18