After
shooting:
With
the
S8
-24
in
TTL auto or non-TTL auto flash mode, if both
viewfinder ready-light and
S8
-24 ready-light blink for a few
seconds after shooting, the flash has operated at maximum
power. Check the
S8
-24's
LCD
to determine whether you were
standing at a distance beyond the indicated maximum range.
Depending
on
conditions, choose a wider aperture for maximum
flash
range (switch exposure mode to A or M if
it
is set at P or
S),
or move closer to the subject.
F4
F·801lN8008
13
To Next Page
