69
■
■
■
Details on Custom settings (Bold: default setting)
ISO sensitivity (p. 24)
The available ISO sensitivity range is ISO 3 to 8000. Pressing the e or f
button increases or decrease the value in increments of 1/3 step. Pressing
the e or f button continuously increases or decreases the value quickly.
• 100
Wireless flash mode (p. 72)
Setting the flash mode in wireless multiple flash photography.
• OFF : Canceled
• MASTER : Master flash unit in the Advanced Wireless
Lighting mode
• MASTER (RPT) : Master flash unit in the Advanced Wireless
Lighting mode (in Repeating flash)
• REMOTE : Remote flash unit in the Advanced Wireless
Lighting mode
• SU-4 : SU-4 type wireless flash mode
Sound monitor in the wireless flash mode (p. 89)
When the SB-800 is used as a wireless remote flash unit, you can activate
or cancel the sound monitor function.
• ON : Sound on
• OFF : Sound off
Non-TTL auto flash mode (p. 38)
Setting the Non-TTL auto flash mode.
• AA : Auto Aperture flash
•A : Non-TTL auto flash
Standby function (p. 21)
Adjusting the time before the standby function is activated.
• AUTO : With a camera body that is compatible with TTL auto flash (p. 8),
the SB-800 turns off when the camera’s exposure meter turns off.
•40: 40 sec.
•80: 80 sec.
• 160 : 160 sec.
• 300 : 300 sec.
• - - - : Standby function canceled
Other functions
To Next Page
Loading...
