53
Transport
Before transporting the scanner:
1 Remove the adapter from the adapter slot.
2 Turn the scanner on.
3 Wait until the status LED stops blinking.
4 Turn the scanner off.
5 Insert the MA-21.
6 Disconnect the power and interface cables.
7 Repackage the scanner in the original packing materials (if the original packing materials
are unavailable, use materials at least as shock resistant as the originals).
Transporting the Scanner
Nikon scanners are certifi ed for use in the region or country of sale only. Transport or use
outside the region or country of sale is at the risk and responsibility of the user.
To Next Page
Loading...
Need help?
General