Custom Install (Macintosh Only)
The Macintosh version of Nikon Scan offers a custom install option that can be used to install
selected program components as described below.
1
Display the “Nikon Scan Installer” dialog
After quitting any applications that may be running, insert the Nikon Scan CD in the CD-
ROM drive and display the “Nikon Scan Installer” dialog as described in steps 2–7 of the
“Uninstall: Macintosh” section (
63–64).
2
Select Custom Install
Select Custom Install from the menu at
the top left corner of the installer dialog
and select or deselect components for
installation by clicking the boxes to their
left.
3
Click Install
Click Install to begin installation of
the selected components. Complete
installation as described in steps 8–13
of “Installing Nikon Scan: Macintosh”
( 17–18).
To Next Page
Loading...
