Nilfisk-Advance MC 6P - Switching On in Suction Mode (Pressure Activated); Switching On in Suction Mode (Flow Activated)

12
1)
Options / model variants
Original instructions
MC 5M - MC 6P - MC 7P
4.2.2 Switching on the
cleaner when it is
connected to open
tanks in suction mode
1)
(Flow activated model)
1. Before connecting the
suction set: 61256 to the
cleaner, fill the hose with
water.
2. Turn the main switch to posi
tion " M ".
3. Unlock the spray gun and
operate it.
4. To start the cleaner again,
operate the main switch
again.
0
I
M
NOTE!
The cleaner automatically
switches off after more than 5
minutes of inactivity.
See chapter 9.4 for max. suction
height.
4.2.1 Switching on the
cleaner when it is
connected to open
tanks in suction mode
1)
(Pressure activated
model)
1. Before connecting the
suction set: 61256 to the
cleaner, fill the hose with
water.
2. Turn the main switch to posi
tion " I ".
3. Unlock the spray gun and
operate it.