Nilfisk-Advance MC 6P - 7 Maintenance; Maintenance Plan; Maintenance Work

20
1)
Options / model variants
Original instructions
MC 5M - MC 6P - MC 7P
7 Maintenance
7.1 Maintenance plan
Weekly
First time
after 50
operating
hours
Every 500
operating
hours
As required
7.2.1
Cleaning water inlet fi lter
QQ
7.2.2
Checking pump oil level
Q
7.2.3
Changing pump oil
Q
7.2.4
First change - and
cleaning of magnet on
drain plug
Q
7.2 Maintenance work
7.2.1 Cleaning water inlet
filter
A water filter is fitted on the wa-
ter inlet to prevent large parti-
cles of dirt from entering into the
pump.
1. Unscrew the quick-release
connection if mounted.
2. Remove the filter and rinse it.
Replace damaged filter.
7.2.2 Checking the pump oil
level
1. Check the oil level.
On level ground, the oil
should be above MIN. level
(A), when the oil is cold.
A