Nilfisk-Advance MC 6P - Lifting with Crane

14
1)
Options / model variants
Original instructions
MC 5M - MC 6P - MC 7P
4.6 Lifting with crane
1. Before crane lifting the
machine should be in
balance. Loosen the screw
(A), push the handle (B) a
little forward.
2. When the two marks are
aligned (C), the handle is in
crane-lifting -position.
3. Be carefull to fasten the
screw (D) in the lifting
position.
4. Wrap a belt strop around
center of the handle (E)
for the crane to hook in.
WARNING!
Do not stand under the
machine hanging in the
air.
AB
D
E
C