Nilfisk-Advance MC 6P - 6 After Using the Cleaner; Switching off the Cleaner; Disconnecting Supply Lines; Rolling up the Hose and Storing of Lance

18
1)
Options / model variants
Original instructions
MC 5M - MC 6P - MC 7P
6 After using the cleaner
6.1 Switching off the
cleaner
1. Turn the main switch to posi-
tion „OFF“.
2. Close water tap.
3. Squeeze the spray gun han-
dle until the cleaner is de-
pressurised.
4. Lock the safety catch on the
spray gun.
O
I
6.2 Disconnecting supply
lines
1. Remove the water hose from
the cleaner.
2. Pull out the plug from the
electrical socket.
6.3 Rolling up the hose and
storing of lance
Risk of tripping!
To prevent accidents, always
carefully roll up the hose.
1. Wind up the hose as illu-
strated.
2. Place the spray lance into
the spray lance storage.
1. Winding up the cable from
front over the fastening
screw (A) and clock-wise
around the cable hooks (B).
6.4 Winding up the cable
A
B