27Service Manual – SC900 20 - Wheel System, Traction
Special Tools
Curtis Programmer
The Curtis 1313, 1311, or 1307 generation Programmers may be used to display drive controller error
codes and program the drive controller. The programmer presents complete diagnostic information in plain
language without codes to decipher. Faults are displayed in the Diagnostic Menu, and the status of the
controller inputs/outputs is displayed in the Test Menu.
The handheld programmer can also be used to access the drive controller’s diagnostic history le. This le
contains the history of cleared error codes, which may be helpful in determining the functional status of the
machine between service intervals.
Refer to the Curtis Programmer manual for further information regarding the use and operation of the
handheld programmer.
To Next Page
Loading...
Need help?
General
