Nilfisk-Advance SOL 3 User Manual

SOL 3 / SOL 5 W / BDC 3122 / BDC 3140 / E-VAC3000
5
03/2009
GB
Maintenance and repairs
WARNING!
Disconnect the vacuum cleaner from its power
source before cleaning, servicing, replacing parts or
converting it to obtain another variant, the plug must
be removed from the socket.
■ Carryoutonlythemaintenanceoperations
described in this manual.
■ Useonlyoriginalspareparts.
■ Donotmodifythevacuumcleanerinanyway.
Failuretocomplywiththeseinstructionscould
jeopardizeyoursafety.Moreover,suchaction
would immediately void the EC declaration of
conformity issued with the vacuum cleaner.
WARNING!
To carry out maintenance operations which are not
described in this manual contact the manufacturer’s
Service Centre or our sales network.
Wet and dry applications
[ NOTE ]
■ Thesuppliedltermustbecorrectlyinstalled.
■ Ifthevacuumcleanerisusedtovacuumliquids,
makesurethattheliquidlevelsensoractivatesand
operatesinthecorrectway.
WARNING!
Comply with the safety regulations governing the
materials for which the vacuum cleaner is used.
WARNING!
Iftheversionforliquidsisused:
■ Makesurethattheliquidlevelsensoroperates
correctly before vacuuming liquids.
■ Iffoamforms,stopthevacuumcleaner
immediately and empty the container.
■ Warning:Switchoffthevacuumcleaner
immediately if foam or liquid leaks out.
■ Regularlycleantheliquidlevellimitingdevice
and check to make sure that there are no signs of
damage.
■ Warning:thedirtyliquidcollectedbythevacuum
cleaner must be considered conductive.

Nilfisk-Advance SOL 3 Specifications

General

Brand	Nilfisk-Advance
Model	SOL 3
Category	Vacuum Cleaner
Language	English