Nilfisk-Advance SW5500 B User Manual

172Service Manual – SW5500, FLOORTEC R 985 29 - Engine System, LPG
Engine Oil Change
WARNING: The discharged engine oil must be disposed of properly according to the Law in force.
Note: It is advisable to change the oil when the engine is still hot, to make the oil downow easier.
1. Drive the machine on a level oor.
2. Turn the ignition key to “0”, then engage the
parking brake.
3. Open the engine compartment hood with the
handle and fasten it with the support rod.
4. Lift and remove the machine right side panel,
disengaging it from the upper and lower
fasteners.
5. Remove the cap (A).
6. Unhook the drain hose (B) and bring it towards
the outside of the machine.
7. Remove the drain plug (C) from the hose and
drain the oil into a suitable container, then ret
the oil drain plug and return the hose to its
initial location.
8. Remove the ller cap (D) and pour in the new oil
through the ller until it reaches the upper limit
(E) of the cavity.
Note: As for engine oil type and quantity,
see Technical Data and the Honda
Engine Manual.
9. Reinstall the ller cap (D) and the cap (A) safely.
10. Perform in the reverse order steps 3. and 4. .
A
D
E
B
C
E
LPG VERSION
E
E
C
A
B
D
Figure 7:

Nilfisk-Advance SW5500 B Specifications

General

Brand	Nilfisk-Advance
Model	SW5500 B
Category	Floor Machine
Language	English