25Service Manual – SW5500, FLOORTEC R 985 03 - General Information
Technical Data (Continues)
Model SW5500 B
FLOORTEC R 985 B
SW5500 D SW5500 LPG
FLOORTEC R 985 LPG
Weight Curb weight (without
batteries)
1,402 lb (636 Kg) 1,669 lb (757 Kg) 1,684 lb (764 Kg)
Total curb weight (*) 2,427 lb (1,101 Kg) 1,847 lb (838 Kg) 1,920 lb (871 Kg)
Front axle curb weight (*) 1,106 lb (502 Kg) 780 lb (354 Kg) 804 lb (365 Kg)
Rear axle curb weight (*) 1,320 lb (599 Kg) 1,067 lb (484 Kg) 1,115 lb (506 Kg)
Gross vehicle weight (GVW) 3,011 lb (1,366 Kg) 2,641 lb (1,198 Kg) 2,518 lb (1,142 Kg)
Wheel specic pressure on the oor (front - rear wheels,
in running conditions)
232 - 116 psi
(1.6 - 0.8 N/mm
2
)
101 - 58 psi
(0.7 - 0.4 N/mm
2
)
101 - 72 psi
(0.7 - 0.5 N/mm
2
)
Sound pressure level at workstation
(ISO 11201, ISO 4871, EN 60335-2-72) (LpA)
68 dB(A) ± 3 dB(A) 84 dB(A) ± 3 dB(A) 79 dB(A) ± 3 dB(A)
Machine sound pressure level
(ISO 3744, ISO 4871, EN 60335-2-72) (LwA)
88 dB(A) 104 dB(A) 98 dB(A)
IP protection class X3
Dust guard system water tank (optional) capacity 8.4 US gal (32 liters)
U-turn space (right - left) 91 - 93.5 in (2,310 - 2,375 mm)
Vibration level at the operator’s arms (ISO 5349-1) (**) < 98.4 in/s
2
(< 2.5 m/s
2
)
Vibration level at the operator’s body (ISO 2631-1) 31.5 in/s
2
(0.8 m/s
2
)
(*) With operator on board, fuel tank and hopper empty.
(**) Under normal working conditions, on a level asphalt surface.
CAUTION: If the machine is to be used at ambient temperatures below +10°C, the oil should be
changed with equivalent oil having a viscosity of 32 cSt. For temperatures below 0°C,
use an oil with lower viscosity
Hydraulic Oil Technical Data
AGIP ARNICA 46 32
Viscosity at 40 °C in
2
/s (mm
2
/s) 0.07 (45) 0.05 (32)
Viscosity at 100 °C in
2
/s (mm
2
/s) 0.012 (7.97) 0.009 (6.40)
Viscosity index / 150 157
Flash point COC °F (°C) 419 (215) 396 (202)
Pour point °F (°C) -32.8 (-36) -32.8 (-36)
Density at 15 °C lb/gal (Kg/l) 1.9 (0.87) 1.9 (0.865)
To Next Page
Loading...
Need help?
General
