Nilox EVO4K - Video Parameters Setting; Using Mode Setting; Video Start Delay Timer

16
VIDEO PARAMETERS SETTING
The EVO 4K must be in video mode to set video settings; an icon appears at the top left, if
this is not the case, touch the video shutter key on the front.
Symbol to select on the screen .
USING MODE SETTING
Icon
It allows to select the using mode of EVO 4K video camera.
The choices are:
• Video
• Video without audio
• Audio
• Time Lapse
The intervals available in seconds are: 0.5, 1, 2, 5, 10, 30, off.
The resulting video will be a more or less accelerated video depending on the setting
parameter used.
A normal video has a reproduction of 30 or 60 frames per second.
For example, if you set the parameter at 2 seconds, the result is 30 frames in one
recording minute.
Supposing to display it at 30 frames per second, the final resulting video will last one
second; a one-hour video will last about 60 seconds in play mode.
Obviously, during this mode the photo camera must be fixed on a tripod or leant on a
support.
Note: this function is mostly used to display long events in quick
sequence (blossoming flower, rising sun, moving clouds, etc.)
• Video start delay timer .
The choices available in seconds are: 0.5, 1, 2, 5, 10, 30, off.