Nilox EVO4K - Video Resolution Setting; View Angle Setting; Bitrate; Seamless

17
VIDEO RESOLUTION SETTING
Icon
It allows to select the desired resolution for the video recording.
The choices for the video resolution are the following:
Resolutions
PAL system
NTSC system
4K Cinema
(17:9) 4096 x 2160 12 fps
(17:9) 4096 x 2160 12 fps
4K (16:9) 3840
x 2160
12.5 fps
15 fps
2.7K Cinema (17:9)
2704 x 1440 24 fps
2704 x 1440 24 fps
2.7K (16:9) 2704 x 1524
25 fps
30 ps
1080P (16:9) 1920 x 1080
24 fps, 25 fps, 48 fps, 50
fps
24 fps, 30 fps, 48 fps, 60
fps
960P (4:3) 1280 x 960
48 fps, 50 fps
48 fps,
60 fps
720P (16:9) 1280 x 720
50 fps, 100 fps
60 fps, 120 fps
VIEW ANGLE SETTING
Icon
It allows to set 4 types of views with different angles.
The view available choices are:
• wide (W), medium (M), narrow (N), small (S).
The function is disabled in 4K and 2.7K modes.
BITRATE
Icon
It allows to change the numbers of recorded frames per each recording second.
The bit rate choices available are:
• normal (N), high (F).
The higher the parameter is, the clearer is the image, but the file size increases.
SEAMLESS
Icon
Lets you start or stop the loop recording function.
You can start or stop the loop recording function.
If ON, the video file will be automatically saved in 10-minute segments; If OFF, the video file will
be saved in 15-minute segments.
The bit rate choices available are:
• On, Off.
This function is not available with 1080P 50f/60f, 720P 100f/120f video resolution.