Nilox EVO4K - System Parameters Setting; Key Tone (Alarm Buzzer); Status Indicator; Icon Display (Subtitles On)

20
SYSTEM PARAMETERS SETTING
The cam can be in either video or photo mode to set system settings.
Symbol to select on the screen .
KEY TONE (ALARM BUZZER)
Icon
Set this function to enable the tick tone.
The choices available are: Off, 50%, 100%.
STATUS INDICATOR
Icon
It allows you to turn off the frontal status led.
The choices available are:
• On, 2 (only 1 frontal led and 1 top led on), Off.
ICON DISPLAY (SUBTITLES ON)
Icon
Lets you disable recording icon operations and any other information visible on the viewing
screen.
The choices available are:
• On, Off.
DISPLAY STANDBY
Icon
It allows the automatic turn-off of the video camera display.
The EVO 4K is set to automatically switch to standby if no operation (photo shooting, video
recording or function key) is run for a certain period of time. If any operation is run in the set
time period.
The choices in minutes are:
• 10, 5, 2, Off.
Where there is no operation, the system starts counting the time.
When the preset time is reached, the video camera enters the standby mode.
In case that any operation is carried out in the meanwhile, the system restarts
counting the time.