Nilox EVO4K - Camera Setting Parameters; Acquisition Mode; Photo Resolution Setting; Display Date;Time on Photos

19
CAMERA SETTING PARAMETERS
The EVO 4K must be in video mode to set video settings; an icon appears at the top left, if
this is not the case, touch the shutter key on the top.
Symbol to select on the screen .
ACQUISITION MODE
Icon
Lets you set photo shooting mode.
The choices are:
• Single shot
• Multiple shot
The choices available are: 3, 6, 10 shots per second.
• Self timer
The choices available are: 3, 5, 10-second delay.
Press the Photo key to start the reverse counting timer. The self timer
indicator blinks and the camera takes a picture.
To disable the self timer function proceed as above explained and select OFF; on the
contrary the self timer is maintained.
This function is not available with 1080P 50f/60f, 720P 100f/120f video resolution.
PHOTO RESOLUTION SETTING
Icon
Possible resolutions are:
16.0M (4608×3456 4:3), 12.0M (4000×3000 4:3), 8.0M (3200×2400 4:3).
It allows to select the resolution photo resolution.
DISPLAY DATE/TIME ON PHOTOS
Icon
This function automatically records the date and displays the photo at the bottom right.