16
[PRINT] Printer Setup
Press left and right arrows of [PRINT] to set print functions. Factory
setting value is OFF (print off).
Set value：OFF、5s、15s、30s、60s，which is the interval time of
auto print. For example, when print setup is 30s, the connected
DPU-414 printer will automatically print corresponding data every 30
seconds.
DPU-414 Printer Setup
Dip SW-1
1 (OFF):Input=Serial
2 (ON ):Printing Speed=High
3 (ON ):Auto Loading=ON
4 (OFF):Auto LF=OFF
5 (ON ):Setting Command=Enable
6 (OFF):Printing
7 (ON ):Density
8 (ON ):=100%
Dip SW-2
1 (OFF):Printing Columns=80
2 (ON ):User Font Back-up=ON
3 (ON ):Character Select=Normal
4 (ON ):Zero=Normal
5 (ON ):International
6 (ON ):Character
7 (ON ):Set
8 (OFF):=U.S.A.
Dip SW-3
1 (ON ):Data Length=8 bits
2 (ON ):Parity Setting=No
3 (ON ):Parity Condition=Odd
4 (ON ):Busy Control=H/W Busy
5 (ON):Baud
6 (OFF ):Rate
7 (OFF):Select
8 (OFF):=4800 bps.
To Next Page
Loading...