nokia
CONNECTING PEOPLE
PAGE 4 (21) Approved 1.0
Customer Care EMEA
DJk
Technical Services Confidential 26.01.2004
Repair Concepts
Service Manual 2300 Level 1&2 Copyright 2003-2004 © Nokia Corporation
2. GENERAL REPAIR INFORMATION
IN THIS SECTION THE TECHNICIAN WILL GET SOME GENERAL HINTS HOW TO CARRY OUT REPAIRS:
o
To familiarize oneself with Nokia 2300 read the tutorials or user guide on
www.nokia.com -->Support--> Phones, by selecting the Phone Model.
o Before starting the repair you must take care of ESD precautions like being in your ESD Protected Area and
connecting your wristband.
o Use gloves to avoid corrosion and fingerprints.
o Protect windows and displays with a film to avoid dust and scratches.
o When cleaning the pads you have to use a soft cloth/ESD brush and Isopropanol. It is not allowed to use a
glass fiber pencil because it scratches the surface and will lead later on to corrosion.
o Mechanical parts (except shielding lids), which didn’t repair the failure, can be reused, if they are not
soldered.
o When removing the shielding lids make sure to replace them with new ones, otherwise the high-frequency
leakage can have an influence on the device.
o Use always original Nokia spare parts.
o Check the soldering joints of the parts which are concerned regarding the indicated error
(e.g. soldered connectors or switches) and resolder them if necessary (Level 2 only).
o Remove redundant soldering flux after repair.
o Meet the torque requirements when assembling the unit (see also the document “torques for transceiver
assembly” on Nokia Partner Web Site).
o Always use your own equipment for testing where you are sure that it works. E.g. if the customer complains
about charger function, please test the phone with your own charger to be sure if phone or charger causes
the malfunction.
o When doing the Faultlogger entries, always note the Item code, which caused the malfunction. Also, fill in
the appropriate part code from the assembly, if needed.
o Please be aware that some malfunctions could be software related and solved by an update.
There are several Service Bulletins, which have to be followed:
First, take care for the latest content pages of Service Bulletins, which are always available on
Nokia Partner Web Site. This is also important to recognize, if existing Bulletins have become invalid.
The service level indicator at the bottom of each document tells the appropriate destination.
Downloads > Support Library >
• General Service Bulletins
• Service Tools Service Bulletins
• Spare Part Service Bulletins
• Common Softwares Service Bulletins
• Instructions
• etc,…
Please check Nokia Partner Web Site (PWS) for latest news and files on a regular basis.
To Next Page
Loading...
Need help?
General
