103
Operator selection—To set the phone to search for and select automatically one
of the available networks, select Automatic. To select the desired network
manually from a list of networks, select Manual. If the connection to the
manually selected network is lost, the phone sounds an error tone and asks
you to select a network again. The selected network must have a roaming
agreement with your home network, that is, the operator whose SIM card is
in your phone.
Cell info display (network service)—To set the phone to indicate when it is
used in a cellular network based on microcellular network (MCN) technology
and to activate cell info reception, select On.
Connection
Select Menu > Settings > Phone sett. > Connection > Bluetooth, USB, Access
points, Packet data, Data call, SIP settings, Configurations, or APN control.
Bluetooth
Switch Bluetooth on or off, and edit Bluetooth settings. See ”Bluetooth
connection,” p. 115.
USB
Edit USB settings. See ”USB connection,” p. 118.
Access points
To establish a data connection, an access point is required. You can define
different kinds of access points:
• MMS access point to send and receive multimedia messages
• WAP access point to view web pages
• Internet access point (IAP) (for example, to send and receive e-mail)
To Next Page
Loading...
