18
■ Switch the phone on and off
Press and hold the power key.
If the phone asks for a PIN code, enter the PIN code, and
select OK.
If the phone asks for the lock code, enter the lock code, and
select OK. The factory setting for the lock code is 12345.
■ Set time and date
To set the correct time zone, time, and date, select the country you are
presently in, then enter the local time and date.
■ Normal operating position
Use the phone only in its normal operating position.
During extended operation, such as an active video call or
high speed data connection, the device may feel warm. In
most cases, this condition is normal. If you suspect the
device is not working properly, take it to the nearest
authorized service facility.
Your device has internal antennas.
To Next Page
Loading...
