24
You have missed calls. See ”Recent calls,” p. 40.
Shown if Ringing type is set to Silent and Message alert tone and E-
mail alert tone are set to Off. See ”Profiles,” p. 84.
The phone keypad is locked. See ”Keypad lock (keyguard),” p. 27.
The loudspeaker is activated.
An alarm is active.
The second phone line is being used. See Line in use in ”Call,” p. 100.
/ All calls to the phone are diverted to your call mailbox or
to another number. If you have two phone lines, the divert
indicator is for the first line and for the second.
A headset is connected to the phone.
A loopset is connected to the phone.
The connection to a Bluetooth headset has been lost.
/ A data call is active.
A GPRS packet data connection is active. indicates the connection
is on hold and that a connection is available.
A packet data connection is active in a part of the network that
supports EGPRS. indicates the connection is on hold and that a
connection is available. The icons indicate that EGPRS is available in
the network, but your device is not necessarily using EGPRS in the
data transfer.
A UMTS packet data connection is active. indicates the connection
is on hold and that a connection is available.
To Next Page
Loading...
