EasyManuals Logo

Nokia 7210 SAS-M User Manual

Nokia 7210 SAS-M
748 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #126 background imageLoading...
Page #126 background image
Boot Options
126
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
If the boot.tim is not found in any of these locations, the boot procedure fails. If the
boot.tim image is found, the system searches for bof.cfg (the boot options file) on the
same storage device in the root directory. For example, if boot.tim is found on cf2:\,
the system also looks for bof.cfg in cf2:\bof.cfg.
If bof.cfg is found, the system uses the BOF to locate the TiMOS software (both.tim
file), configuration file, and other boot parameters, and processes them to boot the
system. If the BOF is not found, the system attempts to retrieve the BOF from the
network using the auto-init mode and create a new BOF as part of the auto-init
process.
In some cases, the BOF may specify different storage device locations for the TiMOS
image (both.tim) and the configuration file. For example, the bootstrap image
boot.tim file may be located on cf1:\, but both.tim and the configuration file may not
be located on this device. You can use the show>system>information command
to identify the location of the BOF and the boot.tim image used to boot the system.
The following is a sample output of system information for the 7210 SAS-T.
*...........
Boot-loader Source : cf1:
BOF Source : cf1:
Image Source : primary
Config Source : N/A
Last Booted Config File: N/A
Last Boot Cfg Version : N/A
Last Boot Config Header: N/A
Last Boot Index Version: N/A
Last Boot Index Header : N/A
Last Saved Config : N/A
Time Last Saved : N/A
Changes Since Last Save: Yes
User Last Modified : admin
Time Last Modified : 2000/06/01 20:03:28
Max Cfg/BOF Backup Rev : 5
Cfg-OK Script : N/A
Cfg-OK Script Status : not used
Cfg-Fail Script : N/A
Cfg-Fail Script Status : not used
*A:SAST>show>system#
See System Boot Option Modes for more information about the auto-init and manual
boot option modes, and how the system processes these options and loads the boot
loader (boot.tim), the TiMOS image (both.tim), and the configuration file to make the
system operational and ready for use.

Table of Contents

Other manuals for Nokia 7210 SAS-M

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nokia 7210 SAS-M and is the answer not in the manual?

Nokia 7210 SAS-M Specifications

General IconGeneral
BrandNokia
Model7210 SAS-M
CategoryCell Phone
LanguageEnglish

Related product manuals